NETGEAR M4200 User Manual

IPv6 Interface Configuration
549
Managed Switches
Web Interface: Create an IPv6 VLAN Routing Interface
1. Create VLAN 500.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 500.
c. In the VLAN Type field, select Static.
d. Click Add.
2. Add ports to VLAN 500.
a. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID list, select 500.
c. Click Unit 1. The ports display.
d. Click the gray box under port 1 until U displays, indicating that the egress packet is
untagged for the port.
e. Click Apply.
3. Specify the PVID on port 1/0/1.
a. Select Switching > VLAN > Advanced > Port PVID Configuration.

NETGEAR M4200 Specifications

General

Brand	NETGEAR
Model	M4200
Category	Switch
Language	English