NETGEAR M4200

MVR
296
Managed Switches
A screen similar to the following displays.
b. Under MVR Interface Configuration, scroll down and select the Interface 0/1, 0/5 and
0/7 check boxes.
c. Enter the following information:
• In the Admin Mode list, select Enable.
• In the Type list, select Receiver.
d. Click Apply to save the settings.
6. Configure source interface.
a. Select Switching > MVR > Basic > MVR Interface Configuration.
A screen similar to the following displays.
b. Under MVR Interface Configuration, scroll down and select the Interface 0/9 check
box.
c. Enter the following information:
• In the Admin Mode list, select Enable.
• In the Type list, select source.
d. Click Apply to save the settings.
7. Configure MVR Group Membership.
a. Select Switching > MVR > Advanced > MVR Membership.