Nordson freedom - To replace the level sensor cable (contd)

Repair
8-13
Part 1123087_02
 3/2014 Nordson Corporation
X3
X1
1
2 3
4
1.1 NSm
(10 in.‐lb)
1.1 NSm
(10 in.‐lb)
Figure 8‐8 Replacing the level sensor cable
1. Fill board end of the level sensor cable
(connects to X3)
2. Level sensor cable ground wire
(connects to the fill board)
3. Level sensor cable ground wire
(connects to the grid/hopper
assembly)
4. Level sensor board end of the
level sensor cable (connects
to X1)