Nordson freedom - To install the pump

Repair
8-42
Part 1123087_02
 3/2014 Nordson Corporation
To install the pump
1. See Figure 8‐28. Prepare the replacement pump as follows:
a.. Remove the plastic plugs (2) from all the ports.
b.. Coat the O‐rings (3) with O‐ring lubricant.
c.. Place six drops of SP pump oil into the air inlet fitting (1).
d.. Remove the pump lubrication tag (4).
4
2
3
1
Figure 8‐28 Preparing the replacement pump for installation
1. Air inlet fitting
2. Plastic plug
3. O‐rings
4. Pump lubrication tag