Installation
3-13
Part 1123087_02
3/2014 Nordson Corporation
5. See Figure 3‐11. Using the M5 bottom support knob from the ship‐with
kit, fasten the melter bottom bracket to the stand.
Figure 3‐11 Securing the melter bottom bracket on the floor stand
CAUTION! Risk of equipment damage. Before moving a floor stand with
casters, unlock the casters and make sure the path is clear of debris. Lock
the casters after moving is complete.
6. Make sure the floor stand is on a level surface and that the casters are
locked.
To Next Page
Loading...
