Nordson freedom - Mounting the Melter on the Bench Stand (contd)

Installation
3-16
Part 1123087_02
 3/2014 Nordson Corporation
Mounting the Melter on the Bench Stand (contd)
WARNING! Risk of personal injury or equipment damage. Installation of the
melter requires two people.
5. See Figure 3‐14. With one person on each side of the melter, make sure
each person grasps each handle with one hand.
6. Lift the melter vertically and position it on the mounting bracket.
Figure 3-14 Installing the melter on the bench stand