Nordson freedom - Connect Applicator Signal Wiring (contd)

Installation
3-31
Part 1123087_02
 3/2014 Nordson Corporation
2
3
1
Hose/applicator 1 + out
Chassis
Chassis
Chassis
Chassis
X1
Hose/applicator 1 - out
Hose/applicator 2 + out
Hose/applicator 2 - out
Hose/applicator 3 + out
Hose/applicator 3 - out
Hose/applicator 4 + out
Hose/applicator 4 - out
Figure 3‐23 Connecting the applicator signal wiring to terminal block X1 on the hose interface board
1. Terminal block X1 2. Strain relief for applicator signal
wiring
3. Hose interface board