Nordson freedom - Connect to a Single-Feed Adhesive Storage Bin (contd)

Installation
3-47
Part 1123087_02
 3/2014 Nordson Corporation
Melter right side
Bin end of
transfer hose
Melter end of
transfer hose
2
11
1
10
8
Adhesive storage bin
pump box
Quick‐disconnect option
Main air
supply
source
7
4
2
5
6
9
3
Figure 3‐31 Making the transfer hose and solenoid harness connections for a single‐feed bin
1. Adhesive transfer hose
2. Transfer hose solenoid harness
3. Standard transfer hose solenoid
harness
4. Transfer hose solenoid harness
connection on melter
5. Ground screw on pump box
6. Quick‐disconnect adapter harness
7. Venturi pump air input
8. Venturi pump installed in adhesive
inlet on the bin
9. Pneumatic control kit
10. Customer‐supplied air line to
adhesive bin air input port
11. U‐shaped transfer hose
bracket