Nordson freedom - Connect to a Multi-Feed Adhesive Storage Bin (contd)

Installation
3-53
Part 1123087_02
 3/2014 Nordson Corporation
2
Melter right side
Bin end of
transfer
hose
Melter end of
transfer hose
1
3
Adhesive storage bin pump box
Quick‐disconnect option
Main air
supply
source
4
Sequencer
5
7
12
11
10
8
6
9
Figure 3‐35 Making the transfer hose and solenoid harness connections for a multi‐feed bin
1. Standard transfer hose solenoid
harness
2. Sequencer and bracket
3. Adhesive transfer hose
4. Transfer hose solenoid harness
connection on melter
5. Sequencer solenoid harness
6. Main air supply input
7. Pneumatic control kit
8. Ground screw on pump box
9. Quick‐disconnect adapter harness
10. Venturi pump installed in adhesive
inlet on the bin
11. Venturi pump air input
12. U‐shaped transfer hose
bracket