Specifications 9-1
9 Specifications
9.1 Overview
Facility requirements and specifications are listed in Table 9-1. All facility power sources must be safely
grounded. Meeting the requirements will ensure reliable operation and safety of the dispensing system.
This section covers the following topics:
• Facility Requirements
• Declaration of Conformity
• System Dimensions
• Stability Analysis
WARNING! To ensure optimal performance and safety, it is necessary to install the
dispensing system in a facility that meets the requirements listed in Table 9-1.
Failure to meet these requirements could cause serious bodily harm to the user
and serious damage to the dispensing system. If you have any questions, please
contact Nordson ASYMTEK Technical Support.
To Next Page
Loading...
