Nordson Spectrum II Series User Manual

2-4 Safety
2.4.3 Preventing Dispensing System and Workpiece Damage
• Immediately push the EMO button if dispensing system or a workpiece is in danger of
being damaged.
• Use standard Electrostatic Discharge (ESD) precautions when working near sensitive
components. Always wear a grounding strap and connect it to the ESD ground before
handling workpieces.
• Immediately contain and clean up any caustic or conductive fluid spills as recommended in
the material manufacturer’s SDS. If fluid gets into internal portions of the machine,
immediately contact Nordson ASYMTEK Technical Support.
• Follow all recommended system maintenance procedures.
• Always keep the dispensing area clear of any fallen workpieces or obstacles.
• Ensure that no air intakes or exhaust grilles are blocked when the system is in operation.
2.5 Disposal
• Dispose of equipment and materials used in operation and servicing in accordance with
local regulations.
• Depending on the fluid dispensed and cleaning materials used, the following items may
contain substances whose disposal might be regulated:
- Purge/Scale Cups
- Purge Boots
- Dispensing Needles/Nozzles
- Seats
- Luer Fittings
- Fluid Tubes
- Syringes
- Conveyor Belts

Nordson Spectrum II Series Specifications

General

Brand	Nordson
Model	Spectrum II Series
Category	Dispenser
Language	English