Appendix A - Material Safety Information A-17
Handling:
When handling product in drums, safety footwear should be worn
and proper handling equipment should be used. Prevent spillages.
Storage:
Keep in a cool, dry, well-ventilated place. Use properly labelled
and closable containers. Avoid direct sunlight, heat sources and
0 °C minimum to 50 °C maximum.
Recommended materials:
Use mild steel or high density polyethylene (HDPE) for containers
Avoid PVC for containers and container linings.
Other information:
Polyethylene containers should not be exposed to high
temperatures because of possible risk of distortion.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational exposure
None established.
Wash hands before eating and drinking.
PVC or nitrile rubber gloves.
Eye protection:
Wear safety glasses or full face shield if splashes are likely to
Body protection:
Minimize all forms of skin contact. Wear overalls to minimize
contamination of personal clothing. Launder overalls and
undergarments regularly.
9. PHYSICAL AND CHEMICAL PROPERTIES
Semi-solid at ambient temperature
< 0.5 Pa at 20 °C (based on mineral oil)
3
Vapour density (air = 1):
Flammability limit – lower:
1% V/V (typical) (based on mineral oil)
Flammability limit – upper:
10% V/V (typical) (based on mineral oil)
Auto-ignition temperature: