Proceed as follows:
Hold the insertion tool with
both hands and move the trans-
fer belt evenly and carefully to-
gether with the sliding foil
around the roller in the direction
of the arrow until the sliding foil
wraps around the roller.
7.
Caution
The soft transfer belt is extremely sensitive to creasing and touch. Kinks and
touching the belt with hard objects should be strictly avoided.
When being pulled off, the transfer belt may rub against the autofeed rope
positioned at the bottom. Ensure that the transfer belt does not touch the
autofeed rope.
Hold onto transfer belt on the
left and right-hand sides and
push it carefully past the aut-
ofeed rope.
If necessary, carefully push the
autofeed rope down slightly.
8.
Chapter 9 - Replacing Expendables382
Removing Transfer Belt in the Upper Print Unit
To Next Page
Loading...
