Proceed as follows:
Caution
Do not use solvents for cleaning.
The cleaning cloth must be damp (preferably with lukewarm water) and lint
and chemical-free.
Clean empty corotron slide-in
unit with a damp, lint-free cloth.
10.
Also clean any visible dirt from
the other side of the corotron
slide-in unit with a damp, lint-
free cloth.
11.
Remove a new corotron wire from the packaging with the change receiver.12.
Insert the corotron wire into the
corotron slide-in unit and push
it towards the handle until it en-
gages.
13.
Chapter 9 - Replacing Expendables 431
Replacing corotron wire
To Next Page
Loading...
