Parker AC30 series User Manual

Parameter Reference D-143
AC30V series Variable Speed Drive
PNO
Name
Path(s)
Type
Default
Range
Units
WQ
View
Notes
MBus
0785
Active 1 - 32.22 VDC RIPPLE
Same as PNO 763
BOOL
NEVER
OPERATOR
02097
0786
Active 1 - 32.23 BASE MODBUS BREAK
Same as PNO 763
BOOL
NEVER
OPERATOR
02099
0787
Active 1 - 32.24 24 V OVERLOAD
Same as PNO 763
BOOL
NEVER
OPERATOR
02101
0788
Active 1 - 32.25 PMAC SPEED ERROR
Same as PNO 763
BOOL
NEVER
OPERATOR
02103
0789
Active 1 - 32.26 OVERSPEED
Same as PNO 763
BOOL
NEVER
OPERATOR
02105
0790
Active 1 - 32.27 STO ACTIVE
Same as PNO 763
BOOL
NEVER
OPERATOR
02107
0791
Active 1 - 32.28 FEEDBACK MISSING
Same as PNO 763
BOOL
NEVER
OPERATOR
02109
0792
Active 1 - 32.29 INTERNAL FAN FAIL
Same as PNO 763
BOOL
NEVER
OPERATOR
02111
0793
Active 1 - 32.30 CURRENT SENSOR
Same as PNO 763
BOOL
NEVER
OPERATOR
02113
0794
Active 1 - 32.31 POWER LOSS STOP
Same as PNO 763
BOOL
NEVER
OPERATOR
02115
0829
Warnings 1 - 32
Monitor::Trips
Parameters::Trips::Trips Status
DWORD
(bitfield)
0:01 OVER VOLTAGE
1:02 UNDER VOLTAGE
2:03 OVER CURRENT
3:04 STACK FAULT
4:05 STACK OVER
CURRENT
5:06 CURRENT LIMIT
6:07 MOTOR STALL
7:08 INVERSE TIME
8:09 MOTOR I2T
9:10 LOW SPEED I
10:11 HEATSINK
OVERTEMP
11:12 INTERNAL
OVERTEMP
12:13 MOTOR OVERTEMP
13:14 EXTERNAL TRIP
14:15 BRAKE SHORT CCT
15:16 BRAKE RESISTOR
16:17 BRAKE SWITCH
17:18 LOCAL CONTROL
18:19 COMMS BREAK
19:20 LINE CONTACTOR
20:21 PHASE FAIL
21:22 VDC RIPPLE
22:23 BASE MODBUS
BREAK
23:24 24 V OVERLOAD
24:25 PMAC SPEED
ERROR
25:26 OVERSPEED
26:27 STO ACTIVE
27:28 FEEDBACK MISSING
28:29 INTERNAL FAN FAIL
29:30 CURRENT SENSOR
30:31 POWER LOSS STOP
NEVER OPERATOR
02185
0830
Warnings 1 - 32.01 OVER VOLTAGE
Same as PNO 829
BOOL
NEVER
OPERATOR
02187
0831
Warnings 1 - 32.02 UNDER VOLTAGE
Same as PNO 829
BOOL
NEVER
OPERATOR
02189
0832
Warnings 1 - 32.03 OVER CURRENT
Same as PNO 829
BOOL
NEVER
OPERATOR
02191
0833
Warnings 1 - 32.04 STACK FAULT
Same as PNO 829
BOOL
NEVER
OPERATOR
02193
0834
Warnings 1 - 32.05 STACK OVER
CURRENT
Same as PNO 829 BOOL NEVER OPERATOR
02195
0835
Warnings 1 - 32.06 CURRENT LIMIT
Same as PNO 829
BOOL
NEVER
OPERATOR
02197
0836
Warnings 1 - 32.07 MOTOR STALL
Same as PNO 829
BOOL
NEVER
OPERATOR
02199
0837
Warnings 1 - 32.08 INVERSE TIME
Same as PNO 829
BOOL
NEVER
OPERATOR
02201
0838
Warnings 1 - 32.09 MOTOR I2T
Same as PNO 829
BOOL
NEVER
OPERATOR
02203
0839
Warnings 1 - 32.10 LOW SPEED I
Same as PNO 829
BOOL
NEVER
OPERATOR
02205
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485