23 Trends
318
To use the NBP measurement to determine the column interval:
1 Select Main Setup then Trends.
2 In the Trends menu, select Setup VitalSigns.
3 In the Vital Signs menu, select Column and then NBP from the pop-up menu.
Making Settings for Histograms
To make settings for histograms, first display the Trends window by selecting Main Setup then
Trends.
Setting the Default Measurement
To set the default for the measurement data to be used in the histogram, in the Trends window,
1 Select Setup Histogram.
2 Select Data Source.
3 Select either
•
Realtime Data, and then a realtime SpO
2
or Pulse, or
•
Trended Data and then select the required measurement from the trended data list.
Setting the Default Period
To set the default period for the histogram, in the Trends window,
1 Select Setup Histogram.
2 Select Select Period and select the required time period from the list.
Setting the Unit for the Data Source
To set the unit for the selected measurement data source, in the Trends window,
1 Select Setup Histogram.
2 Select Unit and select a unit from the list.
Switching Cumulative Value Columns On and Off
To switch the display of the cumulative value columns on or off, in the Trends window,
1 Select Setup Histogram.
2 Select Curve On/Off.
Setting the Range for the Measurement
To set the range to be displayed on the x-axis, in the Trends window,
1 Select Setup Histogram.
2 Select Range, then enter a value for the lower end of the range and the upper end of the range.
Displaying Percentages on Columns
To switch the display of the percentage values above the columns on or off, in the Trends window,
To Next Page
Loading...