EasyManua.ls Logo

Philips MX400 - Monitor Performance Specifications; MX400;450;500;550 Performance Specifications

Philips MX400
534 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 Specifications
464
Monitor Performance Specifications
MX400/450/500/550 Performance Specifications
MX400/450/500/550
Power Specifications Power Consumption <70 W average
Line Voltage 100 to 240 V
Current 1.2 to 0.5 A
Frequency 50/60 Hz
Battery Specifications
MX400 Operating time (with one fully
charged battery)
Basic monitoring configurations 5 hours
(Brightness is set to Optimum, MMS connected, NBP
measurement every 15 minutes).
Extended monitoring configuration: 3.5 hours
(Brightness set to Optimum, MMS and MMS extension
connected, NBP every 15 minutes, Recorder, Pressure,
Temperature modules connected)
Charge Time When monitor is off: approx. 3 hours
When monitor is in use: approx. 5 hours
MX450 Operating time (with one fully
charged battery)
Basic monitoring configurations 4 hours
(Brightness is set to Optimum, MMS connected, NBP
measurement every 15 minutes).
Extended monitoring configuration: 3 hours
(Brightness set to Optimum, MMS and MMS extension
connected, NBP every 15 minutes, Recorder, Pressure,
Temperature modules connected)
Charge Time When monitor is off: approx. 3 hours
When monitor is in use: approx. 5 hours
MX 500 Operating time (with one fully
charged battery)
Basic monitoring configurations 3 hours
(Brightness is set to Optimum, MMS connected, NBP
measurement every 15 minutes).
Extended monitoring configuration: 2.5 hours
(Brightness set to Optimum, MMS and MMS extension
connected, NBP every 15 minutes, Recorder, Pressure,
Temperature modules connected)
Charge Time When monitor is off: approx. 3 hours
When monitor is in use: approx. 5 hours
MX 550 Operating time (with one fully
charged battery)
Basic monitoring configurations 2.5 hours
(Brightness is set to Optimum, MMS connected, NBP
measurement every 15 minutes).
Extended monitoring configuration: 2 hours
(Brightness set to Optimum, MMS and MMS extension
connected, NBP every 15 minutes, Recorder, Pressure,
Temperature modules connected)
Charge Time When monitor is off: approx. 3 hours
When monitor is in use: approx. 5 hours

Table of Contents

Related product manuals