Philips MX400 - 2 Whats New?; Whats New in Release K.1 (for MX400;450;500;550 only)

2
55
2What's New?
This section lists the most important new features and improvements to the monitor and its user
interface introduced with each release. Further information is provided in other sections of this book.
You may not have all of these features, depending on the monitor configuration purchased by your
hospital.
What's New in Release K.1 (for MX400/450/500/550
only)
MX500/MX550
In this release the MX500/MX550 patient monitors join the IntelliVue monitor family. The monitors
are optimized for transport within the hospital environment.
The MX500 has a 12-inch display and the MX550 has a 15-inch display. Both models have three
integrated plug-in module slots for up to three measurement modules, or the IntelliBridge interface
module (865115), or recorder module (M1116B/C). The MX500/550 have the option to be operated
with a single, user-replaceable battery.
EC10 IntelliBridge Interface Board
MX400/450/
500/550
The functionality of the IntelliBridge EC10 plug-in module - interfacing data from a connected
external device into the monitor - is now available in an embedded board. The connector for the
optional interface board is accessed at the rear of the monitor.
Wireless Remote Control
MX400/450/
500/550
The remote control, previously only available with a USB cable connection, can now also be used
wirelessly, with a short-range radio connection, as with the models MX600-800.
What's New in Release K.0
MX400/MX450
In this release the MX400/MX450 patient monitors join the IntelliVue monitor family. The monitors
are optimized for transport within the hospital environment. The MX400 has a 9-inch display and the
MX450 has a 12-inch display. Both monitors can optionally be equipped with an integrated recorder
and have the option to be operated with a single user-replaceable battery.