Philips MX400 - Use Environment

40 Specifications
444
The IntelliVue NMT Module is intended to be used as an objective neuromuscular transmission
monitor, using accelerometry for measuring the muscle contraction following an electrical stimulation
of a peripheral nerve. The NMT Module is intended to be used with adult and pediatric patients.
Restricted Availability
Following new features and functionality may not be available in all geographies:
• Smart Alarm delays
• IntelliVue Information Center iX
Use Environment
Hospital Environment
The monitors are suitable for use in all medically used rooms which fulfill the requirements regarding
electrical installation according to IEC 60364-7-710 "Requirements for special installations or locations
- Medical locations", or corresponding local regulations.
WARNING
The monitors are not intended for use in an MRI environment or in an oxygen-enriched environment
(for example, hyperbaric chambers).
Physical Security and Limited Access to the Monitor
Access to the monitor must be limited to authorized users. It is important that you consider physical
security measures to ensure that unauthorized users cannot gain access.
Manufacturer's Information
You can write to Philips at this address
Philips Medizin Systeme Boeblingen GmbH
Hewlett-Packard-Str. 2
71034 Boeblingen
Germany
Visit our website at: www.healthcare.philips.com/us/.
© Copyright 2013. Koninklijke Philips N.V. All Rights Reserved.
BIS Manufacturer's Information
BISx, the BIS Engine, the DSC, the Patient Interface Cable and the BIS Sensor are manufactured by
Covidien:
Covidien llc
15 Hampshire Street
Mansfield, MA 02048
USA