PREVOST LE MIRAGE XLII BUS SHELLS User Manual

PROCEDURE NO: PR470046 REVISION 5
Page 3 of 5
Section 3 S/S Body Panel Preparation
A) Clean using anti-silicone.
(See PR000001, Section A)
B) Sand using Scotchbrite.
(See PR000001, Section G)
C) Clean using anti-silicone.
(See PR000001, Section A)
D) Apply Sika 206 G+P.
(See PR000001, Section D)
3.00
Apply double-face self adhesive tape 1/16 x 1/2 6mm from panel edges and remove protective tape
(do not apply into the grooves).
3.05

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English