PREVOST LE MIRAGE XLII BUS SHELLS User Manual

PROCEDURE NO: PR470046 REVISION 5
Page 4 of 5
Section 4 Docking Lamp casing Preparation
SMC Lamp Casing Preparation
A) Sand using Scotchbrite.
(See PR000001, Section G)
B) Clean using anti-silicone.
(See PR000001, Section A)
4.00 *
C) Apply Sika 206 G+P.
(See PR000001, Section D)
4.10 Apply double-face self adhesive tape 1/16 x 1/2.
SECTION 5 GLUING
Important: Make sure that all bonding surfaces are clean and free of dust, residue or dry glue. If
required, clean using a scraper or damp cloth.
Lamp Casing Gluing (SI APPLICABLE)
A) Apply Sika 252
5.00
B) Install casing. If necessary, remove excess using
Sika 208.

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English