PREVOST LE MIRAGE XLII BUS SHELLS User Manual

PROCEDURE NO: PR470047 REVISION 3
Page 3 of 4
B) Draw a line on the side of each panel for
reference (left and right). Draw another line in
the center of the 2 previous lines to define
center piece positioning.
Center Piece Installation
A) B) C)
A)
Apply double-face tape 1/32 x ¼ on top of
center piece.
B)
Apply double-face tape 1/8 x ¼ underneath
center piece.
C) Apply Sika 252.
1.20
D) Center and position center piece with reference
to the lines performed at step 1.15b) and affix
center piece.
Note: Position center piece before compressing
double-face tape.
L.H. & R.H. Panel Installation
1.25
A)
Apply double-face tape 1/16 X 1/4 about 1mm
from panel edge.

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English