PREVOST LE MIRAGE XLII BUS SHELLS User Manual

1.29 JAKE BRAKE
Remove the accumulator as follows:
The accumulator spring is under strong compression. To
avoid possible personal injury if the accumulator spring
is discharged, wear safety glasses and use caution when
removing the retaining ring and cover.
1. Push down on the accumulator cover using the appropriate diameter rod, and remove the
retaining ring. See Figure 1-423.
1. Jake Brake Assembly 3. Retaining Ring Pliers
2. Retaining Ring
Figure 1-423 Removing Retaining Ring
2. Relieve pressure on the accumulator cover.
3. Remove the cover and spring.
All information subject to change without notice.
1-536 From Bulletin 16-60-99 6SE483 9901 Copyright © 1999 DETROIT DIESEL CORPORATION

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English