PREVOST LE MIRAGE XLII BUS SHELLS User Manual

1.29 JAKE BRAKE
3. Loosen the leveling screw locknut and remove the leveling screw from the bridge.
See Figure 1-427.
1. Slave Piston Bridge 2. Slave Piston Leveling Screw
Figure 1-427 Removing the Leveling Screw from the Bridge
The injector rocker arm contains a pin and roller for actuating the engine brake master
piston. If excessive wear or damage to the roller is present, replace the rocker arm assembly.
Refer to Section 1.6.2.
All information subject to change without notice.
1-540 From Bulletin 16-60-99 6SE483 9901 Copyright © 1999 DETROIT DIESEL CORPORATION

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English