Chapter 3 Configuring Your Library
Configuring System Settings
Scalar i500 User’s Guide 128
Manual Cartridge
Assignment 3
Administrators can disable or enable manual cartridge assignment. When
manual cartridge assignment is enabled (the default setting), the
Assign
I/E
screen automatically appears on the operator panel once cartridges are
placed into the I/E station. The
Assign I/E screen prompts the user to use
the operator panel to assign the cartridges to a specific partition or to the
System partition. The cartridges can then be used only by the assigned
partition.
For more information on manual cartridge assignment, see
Disabling/Enabling Manual Cartridge Assignment
on page 77.
The path to open the appropriate screen is as follows:
• From the operator panel, select
Setup > System Settings.
Disable Remote Service
User 3
For security purposes, prevents a service user from logging in to the
library remotely, from either the Web client or over the Ethernet service
port. The service user will still be able to log in to the library from the
operator panel interface. This option is disabled by default.
The path to open the appropriate screen is as follows:
• From the operator panel, select
Setup > System Settings.
Enable SSL 3
Enables Secure Socket Layer (SSL) for secure data transmission between
the library and remote clients. This option is disabled by default.
The path to open the appropriate screen is as follows:
• From the operator panel, select
Setup > System Settings.
To Next Page
Loading...
Need help?
General