Quantum Scalar i500 User Manual

Chapter 12 Installing, Removing, and Replacing
Preparing to Remove or Replace a Module
Scalar i500 User’s Guide 364
Figure 57 Library Configuration
Example 1
2 If cleaning slots are configured for automatic, library–initiated
cleaning operations, export all affected cleaning media from the
elements contained within the module you are removing or
replacing. See Exporting Cleaning Media
on page 262.
3 If cleaning slots are affected and all cleaning media has been
exported from the module you are removing or replacing, reduce or
delete the cleaning slots so that cleaning slots are no longer

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS