Chapter 10 Getting Information – Logs and Reports
Viewing Logged-in Users
Scalar i500 User’s Guide 276
Viewing Logged-in Users
The Logged-in User’s Report report contains information about the users
that are currently logged into the library. The report contains the
following information:
•
User name — Name of logged-in user.
•
Role name — Privilege level of logged-in user (for example, Admin for
administrator,
User for non-administrator, non-service user).
•
Login date and time — Date and time the user logged into the library.
•
Last activity date and time — Date and time the user last logged into
the library.
•
Login location — IP address or host name of the system being used to
access the system.
•
Management interface — User interface being used to access the
system (Web client or operator panel).
The path to open the report from the Web client is
Reports > Logged in
Users
.
Viewing the All Slots Report
The All Slots Report contains information on all slots that are currently
assigned to a partition and all I/E slots. A maximum of 20 responses
displays per page. You can scroll between the pages using the page
arrows at the bottom left of the screen. The report contains the following
information about each slot:
•
Slot type — Drive, I/E station, cleaning, or storage slot.
•
Barcode — Barcode number of the cartridge installed in the slot (no
barcode number means the slot is empty).
•
Partition — The partition that owns the slot.
To Next Page
Loading...
Need help?
General
