Scalar i500 User’s Guide 524
Chapter 14
14Working With Cartridges
and Barcodes
This chapter describes how to work with cartridges and barcodes. When
working with tape cartridges, certain considerations should be taken into
account. For example, all tape cartridges in the library must have a
barcode label. In addition, when loading your library, you should be
aware of whether or not your cartridges are write-protected.
This chapter discusses these types of items in general terms. See Library
Specifications on page 530 for information on what type of tape
cartridges are supported for each drive type.
This chapter covers:
• Handling Cartridges Properly
• Write-Protecting Cartridges
• Barcode Label Requirements
• Supported Barcode Formats
• Installing Barcode Labels
To Next Page
Loading...
