Chapter 13 Troubleshooting
Robotics Diagnostics
Scalar i500 User’s Guide 523
Robotics Diagnostics
The Robotics diagnostics currently include only one test, the Get/Put
Test.
Get/Put Test
13
The Get/Put Test requires the robot to remove one tape cartridge from
the top I/E station slot, and then put the tape cartridge back into the same
slot. To run this test, you must insert a tape into the library’s top
(uppermost) I/E station slot.
Robotics tests cannot be performed from the operator panel. The path to
open the appropriate screen is as follows:
• From the Web client, select
Tools > Diagnostics > Robotics > Robotics
Get/Put Test
.
To Next Page
Loading...
