Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
Scalar i500 User’s Guide 216
Figure 31 StorNext Host
Configuration
3 In the Name field, type a name that you will use to identify the
StorNext Storage Manager server.
4 From the API Client Plug-in drop-down list, select the SNAPI client
plug-in.
5 From the Primary Host Address field, type the IP address (or host
name, if DNS is configured) of the primary StorNext Storage
Manager server.
6 From the Primary Host Port field, accept the default or type the port
number of the primary StorNext Storage Manager server.
7 Optionally, type an IP address (or host name, if DNS is configured)
for a secondary StorNext Storage Manager server in the Secondary
Host Address field.
8 Optionally, accept the default or type a port number of a secondary
StorNext Storage Manager server in the Secondary Host Port field.
Note: The default StorNext Storage Manager port number is
61776. If you changed the port on your server, be sure to
type the new port number into this field.
To Next Page
Loading...
Need help?
General