Quantum Scalar i500 User Manual

Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
Scalar i500 User’s Guide 215
Figure 30 Installing the SNAPI
Plug-in
8 Click Browse to navigate to and select the EDLM plug-in for SNAPI
you downloaded earlier.
9 Click Next.
A confirmation screen appears.
10 Click Install.
The file is installed. When complete, a Success message appears.
11 Click Close to close the Success message.
Step 3: Configuring the StorNext Host Settings on the Library
8
This step is optional. If StorNext Storage Manager is managing your
partitions, you can use it in conjunction with EDLM to automatically
copy data from bad or suspect tapes or to trigger media scans. If you are
not using StorNext in conjunction with EDLM, skip this step.
After installing the SNAPI client plug-in, you must configure the library
to communicate with the StorNext Storage Manager host server.
1 From the Web client, select Tools > EDLM > Configure StorNext
Settings.
The Tools - EDLM StorNext Configuration screen appears.
2 Click Create.
The Tools - EDLM StorNext Configuration entry screen appears.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS