Chapter 10 Getting Information – Logs and Reports
Viewing FC I/O Blade Information
Scalar i500 User’s Guide 279
• Media Security Log — Lists media that have been completely
removed from the library. This log is only available if you have an
Advanced Reporting license installed on the library (see Obtaining
and Installing a License Key on page 88), and you have enabled the
library to collect data for the log file. For more information about this
log and how to enable the library to collect data for the log, see
Configuring and Viewing the Media Security Log
on page 143.
•
Media Usage Log — Lists information regarding data written and
read on the medium and lists statistics pertaining to soft and hard
read and write errors. This log is only available if you have an
Advanced Reporting license installed on the library (see Obtaining
and Installing a License Key on page 88). For more information about
the information displayed in this log, see Viewing the Media Usage
Log on page 144.
•
SKM Encryption Key Import Warning Log — Lists keys that failed the
most recent data key import operation. This log is only available if
you are running Scalar Key Manager (SKM). For detailed information
about this log, see Using the SKM Encryption Key Import Warning
Log on page 201.
The path to open the report from the Web client is
Reports > Log Viewer.
Viewing FC I/O Blade Information
Administrators can view information about all the FC I/O blades
installed in the library. The
Tools - Blade Information screen lists the
following FC I/O blade information:
•
Location—Library location coordinates of the blade:
[module,blade#], where blade# is 1 for the top blade in the module
and 2 for the bottom blade in the module.
•
Firmware Version—Firmware version of the blade (part of the library
firmware).
•
Serial Number— Serial number of the blade.
•
WWNN—World Wide Node Name of the blade.
To Next Page
Loading...
Need help?
General
