Quantum Scalar i500 User Manual

Chapter 14 Working With Cartridges and Barcodes
Installing Barcode Labels
Scalar i500 User’s Guide 529
The cartridge cannot have any stickers or labels attached to the top or
bottom because if the labels come loose, they can get caught in the tape
drives or become unreadable by the scanner.
Figure 72 Barcode Label
Orientation
Caution: Do not place a barcode label or any labels on the top or
bottom of a cartridge. Doing so can cause the tape
cartridge and tape drive operations to fail.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS