Chapter 1 Description
Library Features
Scalar i500 User’s Guide 31
the tape drive slots from the bottom to the top of the library, but the tape
drives can be reinstalled in any available tape drive slot.
For information on adding tape drives, see Adding a Tape Drive
on
page 444.
Library Features
This section describes several features of Scalar i500 libraries.
User Interface 1
The operator panel is located on the front door of the control module and
allows you to work locally on the library via the user interface. The Web
client allows you to view and perform library functions from remote sites
and is accessible through a browser. The operator panel and Web client
contain a similar user interface and functionality.
See Chapter 2,
Understanding the User Interface for more information
about the operator panel and the Web client.
Partitions 1
Partitions are virtual sections within a library that present the appearance
of multiple, separate libraries for purposes of file management, access by
multiple users, or dedication to one or more host applications.
Organizing the library into partitions divides the resources into virtual
sections. Partitions can be used to control access to portions of the library
by granting permissions to user accounts to access certain partitions.
For more information on partitions, see Working With Partitions
on
page 68.
Note: Tape drive filler plates must be in place for the library to
operate at normal speed.
To Next Page
Loading...
Need help?
General