Chapter 12 Installing, Removing, and Replacing
Tape Drive Ethernet Connectivity and the Ethernet Expansion Blade
Scalar i500 User’s Guide 471
Figure 65 Ethernet Expansion
Blade
9 Carefully align the Ethernet Expansion blade with the guide slots in
the bay.
10 Evenly apply pressure to both sides of the blade and slide it into the
expansion module until the latch hooks begin to move toward the
middle of the blade. Push the latch hooks toward the middle of the
blade and into the locked position. You will feel the blade pins
connect with the expansion module’s backplane as the blade locks
into place.
Caution: Forcing the blade into the bay can cause the pins
to bend.
Latch hooks,
open
Status LEDs
To Next Page
Loading...
Need help?
General