Chapter 3 Configuring Your Library
Obtaining and Installing a License Key
Scalar i500 User’s Guide 90
Viewing Licenses and
License Keys 3
To see the licenses you have purchased and obtained, go to:
http://www.quantum.com/licensekeys
.The license history for each
feature is listed (feature licensed, amount licensed, authorization code,
and date license key was obtained). The most recent license contains the
full amount of the license for that feature (for example, the most recent
COD license contains the total number of COD slots licensed) and
replaces previous license keys.
To see which licensable features are enabled on your library, go to the
Licenses screen:
• From the Web client, select
Setup > License.
• From the operator panel, select
Setup > Licenses.
Obtaining a License Key3
To obtain your license key for a new feature or upgrade:
1 Contact your Quantum technical sales representative to submit your
order for the feature or upgrade. See Getting More Information or
Help on page 8.
2 Upon receipt of your order, Quantum will ship you a license key
certificate containing your authorization code.
3 On your library, locate the serial number. You will need the Serial
Number to retrieve your license key from the Web site. To view the
serial number:
• On the operator panel, select
Tools > About Library, or
• On the Web client, select
Reports > About > Scalar i500.
4 Access the Quantum License Key Management Web site at
http://www.quantum.com/licensekeys
.
Note:
If you order more than 46 COD slots:
COD licenses come in 46-slot increments. If you order
more than 46 slots, you will receive more than one license
key certificate. For example, if you want to activate 92
slots, you will receive two license key certificates. You
need to follow the procedure outlined here twice, once for
each certificate. However, because each additional license
key replaces the previous ones, you only need to apply one
license key (the final one) to the library.
To Next Page
Loading...
Need help?
General