Chapter 13 Troubleshooting
Saving and Restoring the Library Configuration
Scalar i500 User’s Guide 494
You cannot e-mail the library configuration record from the operator
panel. The path to open the appropriate screen is as follows:
• From the Web client, select
Tools > E-mail Configuration Record.
Saving the Configuration
Record 13
Administrators can use the Tools - Save Configuration Record screen on
the Web client to e-mail the library configuration record.
You cannot save the library configuration record from the operator panel.
The path to open the appropriate screen is as follows:
• From the Web client, select
Tools > Save Configuration Record.
Saving and Restoring the Library Configuration
The library has many configurable items, such as tape drive IDs,
partitions, user accounts, Import/Export (I/E) stations, and cleaning
slots. In the event of a hardware failure or firmware upgrade, the save
and restore operations can be used to restore the library’s firmware and
configurable items to a previous state.
Note: You cannot restore a saved configuration after removing or
replacing a control module or expansion module. After
removing and/or replacing the module, save the library
configuration for future use.
Note: The Saving and Restoring operations should not be performed
concurrently by multiple administrators logged in from
different locations. You can access the screens, but you cannot
apply changes while another administrator is performing the
same operation.
To Next Page
Loading...
Need help?
General