Quantum Scalar i500

Scalar i500 User’s Guide 52
F
Chapter 3
3Configuring Your Library
Once you have installed the hardware as described in the Scalar i500
Getting Started Guide, you are ready to configure your library’s settings. A
Setup Wizard helps you get started configuring your library, and menu
commands on both the operator panel and the Web client allow you to
reconfigure your library at any time.
This chapter covers:
• About the Setup Wizard
• Using the Setup Wizard
• Accessing the Web Client
• Managing the Network
• Working With Partitions
• Configuring Cleaning Slots
• Configuring I/E Station Slots
• Setting Tape Drive Parameters
• Working With Control Paths
Caution: Always save the library configuration after modifying
configurable items. This will allow you to restore the most
current settings if necessary. See Saving and Restoring the
Library Configuration on page 494.