Chapter 4 Advanced Reporting
Working With Advanced Reporting Reports
Scalar i500 User’s Guide 137
• Time and date of mount (UTC)
• Time and date of dismount (UTC)
• Media motion time (in seconds)
• Tape cartridge barcode
To configure the report, specify the following:
•
Date Range — Specifies the range of time covered in the report.
Choose one of the following:
• Last 7 days
• Last 4 weeks (default)
• Last 3 months
• All History (as far back as there is data in the log file)
•
Attribute — Specifies which values are included in the report. Select
one of the following:
• Data Written/Read (default) — The amount of data written to
and read from each tape drive, shown separately in the chart.
• Total Read and Write — The combined total amount of data
written to and read from each tape drive.
• Media Mount Count — The number of tape cartridge mounts.
• Media Mount Time — The total amount of time media spent in
the selected drive(s).
• Media Motion Time — The total amount of time media spent in
motion while in the tape drive (writing, reading, rewinding, etc.).
•
Chart — How the data is displayed in the chart. Select Area, Bar
(default), Line, or Pie.
•
Type — The chart type. Select one of the following:
• Rollup (default) — Displays the Grouping on the x-axis and the
Attribute amount on the y-axis.
• Trend — Shows how the Attribute amount changes over time for
the selected Grouping.
To Next Page
Loading...
Need help?
General
