Quantum Scalar i500 User Manual

Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
Scalar i500 User’s Guide 231
• Example 2: Partition A has an automatic scan policy to scan tapes on
import. You import a tape. Meanwhile, Partition B has an automatic
scan policy to scan every 180 days. Ten tapes in that partition have
reached the 180-day mark at the same time that you import the tape
into Partition A. Because these automatic scans occur at the same
time, the test session includes all 11 tapes from both partitions.
Within each test session, you view details about each tape that was
scanned (see Viewing EDLM Session Report Details
on page 233).
Working with the EDLM Test Sessions List
8
To view the status of EDLM test sessions (both automatic and manual),
do the following:
1 Log on as an administrator.
2 From the Web client, select Tools > EDLM > Test Results.
The Tools - EDLM Test Results screen appears.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS