Chapter 12 Installing, Removing, and Replacing
Installing a New Multi-Module Library Configuration
Scalar i500 User’s Guide 342
2 Close the library’s I/E station and access doors.
3 Add the tape drives to the modules. For details, see Adding,
Removing, and Replacing Tape Drives on page 444.
4 If your library contains FC I/O blades, install both the I/O blades
and the accompanying fan blades in the expansion module. For
details, see and Adding, Removing, and Replacing the FC I/O Fan
Blade on page 460.
1 Parking tab in “unparked” position
To Next Page
Loading...
