Quantum Scalar i500 User Manual

Chapter 12 Installing, Removing, and Replacing
Removing and Replacing the Library Control Blade and LCB Compact Flash Card
Scalar i500 User’s Guide 414
14 Press Next.
The Network Configuration screen appears. The system defaults to
DHCP. For IPv4 only, you can deselect the DHCP option and assign a
static IP address. You cannot assign a static IP address for IPv6.
15 Accept the default settings by pressing
Apply, or make any changes to
the network settings, and then press
Apply.
The progress window displays a “Success” message when complete.

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS