To Next Page

To Previous Page

Data Management and Documentation

R&S

ESR

545User Manual 1175.7068.02 ─ 12

●

"Set to Default" on page 545

Select Print Color Set ← Colors

For details see "Select Print Color Set" on page 523 softkey of the "Setup" menu.

Color (On/Off) ← Colors

For details see "Color (On/Off)" on page 522 softkey of the "Setup" menu.

Select Object ← Colors

For details see "Select Object" on page 522 softkey of the "Setup" menu.

Predefined Colors ← Colors

For details see "Predefined Colors" on page 522 softkey of the "Setup" menu.

User Defined Colors ← Colors

For details see "User Defined Colors" on page 522 softkey of the "Setup" menu.

Set to Default ← Colors

For details see "Set to Default" on page 522 softkey of the "Setup" menu.

Comment

Opens dialog box to enter a comment. Max. 120 characters are allowed. 60 characters

fit in one line. In the first line, at any point a manual line-feed can be forced by entering

"@".

Date and time are inserted automatically. The comment is printed below the diagram

area, but not displayed on the screen. If a comment should not be printed, it must be

deleted.

For details on the alphanumeric entries refer to Chapter 3.4.3.2, "Entering Alphanu-

meric Parameters", on page 78.

Remote command:

HCOPy:ITEM:WINDow:TEXT on page 962

Install Printer

Opens the "Printers and Faxes" window to install a new printer. All printers that are

already installed are displayed.

For further information refer to Chapter 3.2.4.6, "Selecting and Configuring Printers",

on page 54.

Only user accounts with administrator rights can install a printer.

Report

Provides access to the test report tool. For more information see Chapter 10.3, "Work-

ing with Test Reports", on page 546.

Measurement Documentation – PRINT Key

R&S ESR Series User Manual

Questions and Answers: