Sencore DMG 3200 - Page 102

DMG 3200/3100/3000 – User Manual
Page 102 (306)
Company
Name
A unique key that will be exchanged with the CA system (provided by your CA
vendor)
Server IP
IP address for the CAS server
Server Port
IP port for the CAS server
Preferred VKS
Enable
Enables connection to an external Verimatrix Key Server (VKS). Checking this
checkbox displays the following additional parameters ( Figure 6.10):
Preferred VKS IP – IP address for the external key server
Preferred VJS Port – IP port for the external key server
Figure 6.10 – Additional VKS Parameters
Message
Format
The communication format for messages sent to the CAS server. Choose one of
the following:
• DEFAULT
• 1153
• 1154
• 1155
• 1156
• 1157
Timeout
Duration of timeout for connecting to the CAS server.
Retry Interval
If the previous attempt to connect to the CAS server failed, the retry interval is
the time it takes before the client attempts to connect again.
Connection
Retries
Number of times the client will attempt to connect to the CAS server before
giving up.
Once the bulk descrambler has been initialized, outgoing services can be descrambled in the
same manner as the standard CAM based solutions – by selecting the descrambler module to
be used for descrambling in the Service Properties dialog (on the output configuration page).