DMG 3200/3100/3000 – User Manual
Page 196 (306)
Figure 8.12: Analog Encoder Source configuration
The following parameters are available for source configuration:
Audio Gain
Audio gain can be specified from range of -11.0 to + 11.0
Signal Standard
Available Signal standard are:
• PAL B/B/I/D/K
• SECAM D/K
• PAL Nc
• PAL M
Signal Loss
Available options are:
• Color Bar: Encoder Produces Color Bar when input signal is
lost.
• Black Picture: Encoder Produces Black Picture when input
signal is lost.
8.2.7 Logo Insertion
Once there is a valid logo on the MMI (section 8.8), then it is possible to assign this to an
encoder channel. This is configured on the Logo tab in the Encoder properties:
To Next Page
Loading...