Sencore DMG 3200 - Service Filtering in Semi-Transparent Mode

DMG 3200/3100/3000 – User Manual
Page 165 (306)
7.5.5 Service Filtering in Semi-Transparent Mode
Service filtering in Semi- Transparent mode enables user to enter SID of the services to be
stopped. It is possible to click magnifying icon and select from list of services found on the input.
When a service is added to the filter list, the following will occur:
• All PIDs that are part of a filtered service will be stopped.
• PIDs shared with non-filtered services are not stopped.
• PIDs explicitly mapped through/remapped by user (in the PID Import/Remap section),
that belongs to a filtered service, will not be stopped.
• If PAT re-generation is enabled, PMT PIDs of the filtered services is stopped.
Figure 7.54 – Service Filtering