Sencore DMG 3200 - Licensing

DMG 3200/3100/3000 – User Manual
Page 42 (306)
4.3 Licensing
Licenses for modules in the unit are hosted by individual cards. Hence, the available features
will not be determined before the cards are registered or logged into the MMI board. The table
below lists all available licenses:
Module License Description
audiolevel number-of-audio-pids Enables the number of audio PIDs with audio leveling.
bulkdscr number-of-
descrambled-services
Enables the number of services for bulk descrambling.
verimatrix Enables communication with the Verimatrix CA system
latens Enables commnunication with Latens system
cofdmout-
cable
modulation-cofdm Enables COFDM modulation for the output.
num-ts Enables the number of maximum possible output multiplexes.
dvbs2 dvbs2 Enables the DVB-S2 demodulation options
dvbs2-input-multistream Enables Multistream reception option for the DVB-S2 module
epg epg Enables EPG.
asiout mip-inserter Enables MIP on the ASI output port.
switch/ipin ipin-pro-mpeg-fec Enables the reception of IP FEC streams on supported hardware
seamless-ip-in Enables IP input seamless switching
switch/ipout ip-out-mpts MPTS refers to Multiple Program Transport Stream. Without the ip-out-mpts
license, only SPTS (Single Program Transport Stream) is available.
ip-pro-mpeg-fec Enables IP Forward Error Correction (FEC) option supported hardware
output-redundancy Enables output redundancy for the module.
qamout-a modulation-qam Enables QAM modulation for the output.
num-ts Enables the number of maximum possible output multiplexes.
dvb-t2 dvbt2-input Enables the DVB-T2 demodulation options.
encoder number-of-hd-encoders Enables the number of HD services to be encoded.
number-of-sd-encoders Enables the number of SD services to be encoded.
number-of-statmux-
channels
Number of channels with Statistical multiplexing enabled
transcoder number-of-hd-encoders Enables the number of HD services to be transcoded.