DMG 3200/3100/3000 – User Manual
Page 190 (306)
Audio Type
Audio Type Parameter values
• Normal: Describes normal audio
• Clean Effect
• Hearing Impaired
• VI Commentary
More details can be found in Ref. ITU-T Rec. H.222.0
Figure 8.6– Encoder Audio Parameters
8.2.4 VBI/VANC Parameters
The “VBI/VANC” tab allows you to create Private Data PIDs and configure the PSI/SI
descriptors based on VBI or VANC information in the input SDI signals.
The source data can be embedded in the SDI signal in the VBI (Vertical Blanking Interval) or in
the VANC (Vertical Ancillary)
To Next Page
Loading...