Sencore DMG 3200 - Editing the Logical Chanel Descriptor (NIT)

DMG 3200/3100/3000 – User Manual
Page 172 (306)
the playout carousel.
Edit
Detail configuration of the values:
The BAT Settings dialog provide access to the ability to define
bouquets
The NIT Settings dialog provides access to the Logical Channel
Descriptor’s edit dialog
The TOT Settings dialog provides access to the TOT Local Time
Offset Descriptor’s edit dialog
7.6.3 Editing the Logical Chanel Descriptor (NIT)
The Logic Channel Descriptor in NIT is used to signal to the receiver which service should be
assigned to which channel number. To add a channel assignment in the outgoing NIT, click on
the edit NIT option.
Figure 7.62- Edit NIT Settings
Specifier
Four possible options are available:
• NorDig – the Nordic region descriptor (version 1 and 2)
• DigitalEurope (with HD Simulcast support)
• Ofcom
• LCD – UK specific LCN descriptor
Net ID
Output Network ID
TS ID
Output Transport Stream ID
Service ID
Output Service ID
Service Name
Service Name, obtained from the stream itself. This parameter is