Sencore DMG 3200 - Manual PSI

DMG 3200/3100/3000 – User Manual
Page 50 (306)
5.3 Manual PSI
To manually define input PSI select Inputs

Manual PSI from the Navigation Pane.
In case the input PSI information is not available, a predefinition of the PSI is necessary in order
to configure a service that is occasionally available. This could be used, for instance, to
predefine some services for dynamic VOD usage.
Figure 5.9 - Manually define Input PSI
In the Manual PSI node, click Add Service and enter the appropriate values matching the
incoming stream. The following information is displayed:
Service Id
Service ID for the manual service
PCR PID
PCR PID for the manual service
PMT PID
PMT PID for the manual service
Type
Select one of the following component types:
• Video (MPEG-2)
• H264
• Audio (MPEG-2 audio)
• AAC
• AC-3
• Private Sections
• PES Private
• Manual
PID
PID number for the component
Properties
Additional information for the component, if necessary.